top of page
Safety Through Innovation
ViroPro
“Germ & Virus”
Protection Fog Systems.
Revolutionary Fog Systems to kill Germs and Viruses in most locations with proven systems.
SAFER & EASIER SANITISATION
We believe in providing sanitisation and disinfection solu
tions that are safer to use and
easier to apply.
We do this with disinfectants that are highly effective in killing bacteria, virus’s and
other pathogens, but are safer for use around people than the many dangerous
chemicals contained in common disinfectants.
These disinfectants and sanitisers can be applied using fogging equipment that allows
the disinfectant solution to be applied quickly and effectively.
FOGGING SOLUTIONS
The advantages of fogging
Why use fogging to apply disinfectants, pesticides and other chemicals?
The simple answer is fogging is quick, easy and effective.
Thermal foggers and ULV foggers quickly apply a thin even coverage of chemical
solution over an area. This is due to foggers producing a large number of small
particles that can quickly cover a surface or fill an area. This is an effective way of
covering both airspace (atmospheric fogging) and surfaces.
Why is coverage important?
Bacteria, virus’s and other pathogens as well many insect pests, are very small. When
applying a chemical to a surface it is important to have the best coverage possible over
the entire area, so the solution is in contact with whatever is on the surface. The images
below illustrate the differences between standard spraying, thermal fogging and ULV
fogging. (please note these are not to scale, they are for illustrative purposes only).
Standard spraying:
This creates a variety of large uneven particles,
mostly between 100 and 200 micron. These
particles are not an effective way of covering an
entire surface to kill pathogens or small pests.
Thermal fogging:
Thermal foggers create a high density fog
containing a large number of small particles
around 10 micron in size.
Many of the particles are lighter than air,
allowing use for atmospheric
fogging to kill airborne pathogens or to fog a
large area where the solution will settle on
hard to reach surfaces.
ULV fogging:
ULV fogging: ULV foggers have an
adjustable flow rate and particle size. This
allows them to produce particles from a fine
fog of around 5 micron up to a heavier mist
of 50 microns. This allows a smooth, even
coverage that can be adjusted depending on
the chemical used and the situation.
What about residue?
Standard spraying techniques, often leave a lot of residue resulting in a wet surface.
This is due to the large particles produced in the spray. While this may be acceptable in
cropping and exterior applications; in many interior applications, large amounts of residueare not desired or require time spent wiping the surface dry (which can contributeto the spread of pathogens if not done effectively).
With thermal and ULV fogging, due to the smaller particle size, very little wet residue is
left on the surface.
Quick efficient & effective
Quick to apply, effective coverage, no wet surfaces, efficient and cost effective!
Fogging is a great method of applying disinfectants, pesticides and other solutions in a
variety of situations.
DISINFECTANT
ANK Neutral Anolyte - Disinfectant and Sanitiser
A high strength non-toxic disinfectant and sanitiser for sanitising food
premises and disinfecting areas requiring a high hygiene standard.
Powerful yet benign, very effective against a wide range of pathogens
with a near 100% kill rate.
Safe & Non-Corrosive
Independently tested and verified. ANK Neutral Anolyte can be sprayed
as a concentrate or diluted with water, depending on the application.
For general sanitisation in ULV foggers we recommend diluting the
product at 1:10 - 1 part concentrate to 10 parts water.
pH Neutral and non-corrosive. Safe on surfaces including glass,
plastic, wood and stainless steel.
Approvals
MPI Approved: C23, C43, C51, C61, C104.
AsureQuality assessed: Passed AsureQuality assessment for Food /
Beverage / Dairy factory for food contact surfaces and potable process
/bottled water and food rinse water (including for Farm Dairies) – ref
#H2610.
BioGro Certified Organic: BioGro Certified Input for Organics Ref
#5576. This product is certified for use in organic production.
Available in 5 litreand 20 litre bottles ofconcentrate
Q Bond Plus
Anti-Microbial Sanitiser & Surface Treatment
Q-Bond Plus formula is a bonded, non-leaching surface sanitiser based on the proven Amino
Silane technology.
It imparts a lasting antimicrobial finish to the surface of a wide variety of substrates.
Unlike traditional sanitisers, Q-Bond Plus fluid bonds to the treated surface and dries to form a clear sub-micron coating.
Q-Bond Plus silane-based actives “lock” onto the treated surface providing longer-term protection
against a wide range of pathogens.
2 - 6 weeks protection with a single application.
• Applied as a concentrate.
• Available in 5 litre bottles
Approvals
MPI Approved: C22, C39, C41
ActiSan Atmospheric 300A
chlorine dioxide based disinfectant and virucide.This product has excellent distribution, penetration andsterilisation abilities due to its gaseous nature. Effectiveas a broad spectrum, anti-inflammatory, bactericidal,fungicidal, and virucidal agent, as well as a deodorizer.This disinfectant kills instantly.For ULV fogging we recommend using concentrate forhigh risk areas or diluted to 33% for general areas.Ideal for areas that require assurance of full atmosphericand surface disinfection.A mask is required when fogging, the areas fogged arerecommended to be closed and vacated for 40 minutes,then ventilated for a further 20 minutes after application.Recommended for use in our AutoSpray units.• Available in 10 litre bottlesApprovalsMPI Approved: C41, C43, C61
ULV FOGGERS
ActiFog AF5
The ActiFog AF5 is a powerful but portable ULV fogger.
• Motor: 1400w
• Spray Distance: out to 10 metres
• Tank Capacity: 5 Litres
• Power requirements: 230v
• Flow Rate: 0 - 50 LPH
• Droplet Size: 6 - 50 microns
• Easy adjustment of flow rate and particle size
• Net Weight: 4.8 kg
• Dimensions: 50 x 17 x 50 cm
• 12 Months Warranty - Quality European product
ActiFog AF3
The ActiFog AF3 is the smaller sibling of it’s bigbrother, the AF5.This compact and very portable fogger has thesame specs as the AF5 in power, flow, adjustmentand spray distance. But packs this into a morecompact unit with a 3 litre tank.
• Net Weight: 3.7 kg
• Dimensions: 21 x 28 x 50 cm
• 12 Months Warranty - Quality European product
Vector C100+ and C150+
Powerful and durable ULV machines.
• Motor: 1250w
• Spray Distance: Out to 8 metres
• Tank Capacity: C100: 4 Litres, C150: 6 Litres
• Power: 230v• Flow Rate: 60LPH
• Droplet Size: 5 -50 microns
• Net Weight: 3.5 kg
• Dimensions: 52 x 30 x 16 cm
• 12 Months Warranty - Quality products made in South Korea
THERMAL FOGGERS
ActiFog AutoSpray
The ActiFog AutoSpray unit, is used to automatically cover a
room area with disinfectant spray, for whole room sanitisation.
Easy to set and use - simply set the desired particle size and
the size of the room, the AutoSpray will cover this area with a
fine even spray across all surfaces.
A portable unit that can be used in a variety of room
disinfection and sanitising applications. Suitable for use with a
wide range of disinfectants.
• Particle size: 7 - 20 micron adjustable
• Room Volume Coverage: 1 - 1000 cubic metres
• Radial coverage: Out to 15 metres
• Rotation: 360 degrees
• Efficient: 0.5 - 4 mls of chemical per cubic metre
• 230v - 1100 watt
• Weight: 6.3kg
• 2 year warranty - Quality European product
Vector H100
This portable thermal fogger is ideal for a wide range of uses.
Features include a 4.5 litre plastic tank, a flow rate of 40 LPH and automatic start.
• Horizontal spray distance: 15 - 20 metres
• Maximum flow rate: 40 lph
• Droplet size: 5 - 30 microns
• Power supply: 6V Rechargeable Battery
• Dimensions: 115 x 34 x 25 cm
• Net Weight: 8.5kg
• 12 Months Warranty
ActiFog MS-5000
A mini thermal fogger that is very compact,lightweight and virtually silent.
• Piezo ignition.
• Tank size: 1.8 litres
• Net weight: 1.23kg
• Dimensions: 456 x 166 x 368mm
bottom of page